Userdefine<X>:Seconddata; System:handler; System:keyclick:beeper - Teledyne T3MIL50 User Manual

D.c. milli-ohm meters
Table of Contents

Advertisement

USERdefine<X>:SEConddata
Description
Syntax
Query Syntax
Parameter/
Return parameter
Example

SYSTem:HANDler

Description
Syntax
Query Syntax
Parameter/
Return parameter
Example

SYSTem:KEYClick:BEEPer

Description
Syntax
Query Syntax
Sets or returns the second operand for the selected user
define pin.
USERdefine<X>:SECondata <NR1>
USERdefine<X>:SECondata?
<X>
<NR1>
USER1:SEC 3
Sets the last operand of userdefine1 as the state of the
bin3 result.
Sets or returns the handler state.
SYSTem:HANDler {CLEAR | HOLD}
SYSTem:HANDler?
Clear
HOLD
SYST:HAND HOLD
Sets the test result to the hold state.
Sets or returns the keyclick beeper state.
SYSTem:KEYClick:BEEPer <NR1> | {OFF | ON}
SYSTem:KEYClick:BEEPer?
COMMAND OVERVIEW
1~2
1~8:bin1~bin8 state
9:bin out state
10:hi state
11:low state
12:pass state
13:fail state
It clears the last result before executing
measurement.
It holds the test result and changes
when a different result appears.
Set
Query
Set
Query
Set
Query
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

T3mil50x

Table of Contents