Teledyne T3MIL50 User Manual page 40

1. Select the
compare function
2. Select the
compare mode
40
Compare function
indicator
Reference, limits, compare
mode and beep mode
A measured value that falls within the upper and lower
limits is considered IN (pass), a value that falls below the
lower limits is considered LO, and a value that falls over
the upper limit is a HI.
Lower
limit
LO
For all the compare modes, IN, HI or LO will be shown
on the display for each judgment.
Press to access the compare mode, as shown
Compare
above.
Use the arrow keys to navigate to the Mode setting. Press
the Enter key to toggle the compare mode.
Range Abs,△%, %
T3MIL Series User Manual
Measured value
Reference Upper
value limit
%
IN
Mode
Measured value as a
percentage of the
reference value
Pass/Fail judgment
HI
Move
Toggle
Enter