Teledyne T3MIL50 User Manual page 46

8. How to clear the
result count
46
The Count display mode tabulates the results on the
right-hand side of the display and shows the bin settings
on the left.
Tabulated result
Upper and lower limits of Bin 1~8
To toggle the display mode, go to the Disp setting and
press Enter.
When in the Count display mode, press the
Go to the Clear setting and press Enter. The accumulated
results will be cleared from the display.
T3MIL Series User Manual
of each bin
results
Disp setting
Clear setting
Overall
results
Clear
Move
Toggle
Enter
ESC key.
Move
Clear results
Enter