Teledyne T3MIL50 User Manual page 17

Arrow Keys, Enter
Key
The Drive key in conjunction with the
Drive
up/down arrow keys is used to select
+
the measuring signal: DC+, DC-, Pulse,
PWM, Zero and Standby. In particular,
the Zero setting can be used as a
Enter
+/-10mV DC voltmeter to measure the
EMF of passive components. The
Standby, on the other hand, is used to
break off Relay of Force+/- without
outputting test current, and none of
measurements will be executed.
See page 32 for details. T3MIL50X
only. The drive signal is fixed to DC+
and Standby on the T3MIL50.
Long pressing the Range key will
Range
activate the auto ranging mode.
The Range key in conjunction with the
Range
up/down arrow keys is used to select
+
the resistance measurement range.
When in auto ranging mode, pressing
Enter
the Range key will activate the manual
ranging mode.
The ESC key cancels the current setting
ESC
and returns the cursor to its default
location or returns to the previous
menu, depending on the circumstances.
Enter
GETTING STARTED
The arrow keys and Enter key are
used to edit parameters, to navigate
the menu system and to select
parameter ranges.
17