Teledyne T3MIL50 User Manual page 71

1. Select High
Voltage Protect
setting
2. High Voltage
Protect menu
appears
Note
From one of the main screens, press
the ESC key so that the menu
system at the bottom of the display
has focus.
Go to System and press Enter.
Go to Utility and press Enter.
Go to High Voltage Protect and
press Enter.
Use the up and down arrow keys to change the High
Voltage Protect setting followed by pressing the Enter
button to confirm and take effect.
High Voltage Protect Setting:
When high voltage is detected
from DUT, the warning
message will prompt as the
screenshot shown and will
disappear only after the high
voltage withdraws.
 HVP is turned ON by default and reboot will restore
the unit back to the factory default setting.
 Pressing ESC before pressing ENTER will exit from the
High Voltage Protect setting.
MEASUREMENT
System
menu icon
Move
Select menu
Enter
or setting
On, Off
71