T3Mil50/50X Characteristics - Teledyne T3MIL50 User Manual

T3MIL50/50X Characteristics

T3MIL50 and T3MIL50X are modern high precision programmable DC
Milli-ohm meters suitable for low resistance measurements of switches, relays,
connectors, PCB tracks and a variety of other devices. The meters feature a
color TFT-LCD screen with easy-to-read measurement results. With the
easy-to-use features, superior performance and automatic test interfaces, these
meters are dependable instruments for resistance measurements.
Easy to Use
Features
Performance
10
Each test function on the T3MIL50/50X can be easily
activated by pressing a single front panel key. All the
settings and measurement results are displayed and set on
the TFT-LCD panel at the same time making each
function naturally intuitive to use.
Each primary and secondary measurement result is
displayed prominently on the display along with any
corresponding settings. Sequential measurement results,
such as those from the scan or binning function, are
tabulated in an intuitive and easy-to-read format.
In addition, the meters can recall previously used settings
upon startup, allowing the meter to be ready the next
time it is used in a matter of moments. The meters can
also save or recall up to 20 sets of function settings.
The T3MIL50/50X has nine selectable measurement
ranges from 5mΩ to 5MΩ, a constant current source of
1uA to 1A, an accuracy of up to 0.05%, a 0.1uΩ
resolution and performs measurements using four wire
Kelvin connections for accurate, consistent
measurements.
The ability to choose between high accuracy
measurements at 10 samples/sec (full scale at 50000
counts) or high speed measurements at 60 samples/sec
(full scale at 50000 counts), allows the T3MIL50/50X the
flexibility to fulfill a number of different measurement
roles.
T3MIL Series User Manual