Teledyne T3MIL50 User Manual page 150

EN 61000-4-6:2014 RF Conducted Electromagnetic Field, 3 Vrms, 0.15 MHz
- 80 MHz
EN 61000-4-11:2004+A1:2017 Mains Dips and Interruptions, 0%/1 cycle,
70%/25 cycles, 0%/250 cycles
1
To ensure compliance with all applicable EMC standards, use high- quality
shielded interface cables.
2
Emissions which exceed the levels required by this standard may occur when
the instrument is connected to a test object.
3
This product is intended for use in nonresidential areas only. Use in
residential areas may cause electromagnetic interference.
4
Meets Performance Criteria "B" limits of the respective standard: during the
disturbance, product undergoes a temporary degradation or loss of function
or performance which is self-recoverable.
5
Performance Criteria "C" applied for 70%/25 cycle voltage dips and for
0%/250 cycle voltage interruption test levels per EN61000-4-11.
European Contact:*
Teledyne GmbH, European Division
Im Breitspiel 11c
D-69126 Heidelberg
Germany
Tel: + 49 6221 82700
AUSTRALIA & NEW ZEALAND DECLARATION OF
CONFORMITY – EMC
The instrument complies with the EMC provision of the Radio
Communications Act per the following standards, in accordance with
requirements imposed by Australian Communication and Media Authority
(ACMA):
AS/NZS CISPR 11:2015 Radiated and Conducted Emissions, Group 1, Class
A.
Australia / New Zealand Contacts:*
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067
*
Visit teledynelecroy.com/support/contact for the latest contact information.
150
4 5
RS Components Ltd.
Units 30 & 31 Warehouse World
761 Great South Road
Penrose, Auckland, New Zealand
T3MIL Series User Manual