Teledyne T3MIL50 User Manual page 54

2. Initial Resistance,
Initial Temperature
and Constant
settings
3. Display mode
4. Temperature
compensation
connection.
54
Use the arrows keys to go to Initial Resistance, Initial
Temperature or Constant (inferred initial resistance
temperature) and press Enter.
Use the left and right arrow keys to select a digit and use
the up and down arrow keys to edit the digit. Press Enter
to confirm the edit.
Move
and edit
Select and
Enter
confirm
Initial Resistance
Initial Temperature
Constant
Use the arrow keys to go to Disp. Press Enter to toggle
between the T and △T modes.
T displays the extrapolated temperature at the measured
resistance of the DUT.
△T displays the difference from the extrapolated
temperature at the measured resistance of the DUT and
the ambient temperature. Please refer to page 52 for
further details.
Sensor Connection:
GPIB
RS232
AC 100 240V , 50 60Hz
25VA MAX
TC SENSOR
WARNING
TO AVOID SHOCK,
REMOVE INPUTS BEFORE OPENING.
SER.NO. LABEL
T3MIL Series User Manual
Initial Resistance, Initial Temperature
and Constant settings
000.0001~999.9999 mΩ, Ω, kΩ,
MΩ
-50.0 ~ +399.9 ℃
000.0~999.9
Disp setting
HANDLER / SCAN / EXT I/O
PT-100 temperature
Move
Toggle
Enter
sensor