Teledyne T3MIL50 User Manual page 88

4. Test remote
command
5. Errors or
Problems
88
After Realterm has started, click on the Port tab.
Enter the Baud, Parity, Data bits, Stop bits and Port
number configuration for the connection.
The Hardware Flow Control and Software Flow Control
options can be left at the default settings.
Press Open to connect to the T3MIL50/50X.
Click on the Send tab.
In the EOL configuration, check on the +CR and +LF
check boxes.
Enter the query:
*idn?
Click on Send ASCII.
The terminal display will return the following:
Teledyne,T3MIL50X,TXXXXXXXX,V1.00
(manufacturer, model, serial number, version)
If Realterm fails to connect to the T3MIL50/50X, please
check all the cables and settings and try again.
T3MIL Series User Manual