Teledyne T3MIL50 User Manual page 42

5. Beep setting
Note
6. Type setting
Note
42
Use the arrow keys to navigate to the Beep setting.
Press Enter to toggle the beep setting.
Off, Pass, Fail
Beep Setting:
The Beep setting can also be set from the
System>Utility>Beep>Compare menu.
Use the arrow keys to navigate to the Type setting.
Press Enter to toggle the type setting.
Ohm, TC
Type Setting:
The measured value is displayed according to Type setting
is selected.
For TC function comparison, please make sure the
relative TC setting is done. See page 49 respectively for
details.
T3MIL Series User Manual
Beep setting
Type setting
Move
Toggle
Enter
Move
Toggle
Enter