Teledyne T3MIL50 User Manual page 16

T3MIL Series User Manual
The Speed key toggles between 10
Speed
samples per second and 60 samples per
second (Slow rate and Fast rate).
The REL key is used to perform a zero
REL
adjustment to the test leads or a DUT.
The RT key is used to display the
RT
real-time (not averaged) measured
resistance value.
The Scan key is used to turn on the
Scan
Scan function.
The Dry key is used to turn on the dry
Dry
circuit measurement mode which allows
the T3MIL50X to measure the contact
resistance of switches and connectors
according to DIN IEC 512 and ASTM
B539 standards. T3MIL50X only.
When in the internal trigger mode,
Trigger
pressing the Trigger key will turn on the
external trigger mode. When in the
external trigger mode, pressing the
Trigger key will perform a manual
trigger.
A long press of the Trigger key when in
external trigger mode will reset the
trigger mode back to the internal trigger
mode.
The Display key toggles between the
Display
standard display mode and the
simplified display mode (sans menus
and display icons).
The Local key will switch the milliohm
Local
meter between local and remote mode.
The Diode key is used to turn on the
Diode
Diode measurement function.
16