Toshiba e-STUDIO5540C Service Manual page 526

Sub
05/08 Mode Element
element
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
e-STUDIO5540C/6540C/6550C (Ver08)
Sub-
Item Subitem Code
code
Weighting/Print 6089
Weighting/Print 6089
Weighting/Print 6089
Weighting/Print 6089
Weighting/Print 6089
6090
Default Acceptable
Details
value value
1 Black/Large 100 0-9999
2 Full color/Small 100 0-9999
3 Full color/Large 100 0-9999
4 Twin 100 0-9999
Color/Monocolor/Smal
l
5 Twin 100 0-9999
Color/Monocolor/Larg
e
Truncation after 0 0-1
decimal point of
custom counter value
119
RAM Contents
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before changing
this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before changing
this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before changing
this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before changing
this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before changing
this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
SYS Sets the display method of custom counter value of
total counter.
When the value is displayed as integer, the total
counter value (total value of each color) is sum of the
truncated custom counter value of each color. Note that
the value slightly decreases compared to display with
decimal point.
0: Displays 2 decimal places.
1: Displays integer (Truncation after decimal point)
Proce Servic
dure e UI
4
4
4
4
4
1