Toshiba e-STUDIO5540C Service Manual page 666

Sub
05/08 Mode Element
element
08 Setting System User Sound
Mode interface
08 Setting System User Screen setting
Mode interface
08 Setting System General
Mode
08 Setting System General
Mode
08 Setting System General
Mode
08 Setting System General
Mode
08 Setting System Network
Mode
08 Setting System User
Mode interface
08 Setting System Network
Mode
e-STUDIO5540C/6540C/6550C (Ver08)
Sub-
Item Subitem Code
code
9325
9326
9327
9328
9329
9330
9331
9332
9334
Default Acceptable
Details
value value
Key touch sound of 1 <0-1>
control panel
Size indicator 0 <0-1>
Setting of banner 0 0-1
advertising display
Banner advertising - -
display 1
Banner advertising - -
display 2
Display of [BANNER 0 0-1
MESSAGE] button
Local I/F time-out 6 1-50
period
Original counter Refer to 0, 2, 4
display contents
PCL line feed code 0 0-3
setting
259
RAM Contents
SYS 0: OFF
1: ON
SYS 0: Invalid
1: Valid
SYS Sets whether or not displaying the banner advertising.
The setting contents of 08-9328 and 08-9329 are
displayed at the time display section on the right top of
the screen. When both are set, each content is
displayed alternately. 0: Not displayed 1: Displayed
SYS Maximum 27 letters (one-byte character)
SYS Maximum 27 letters (one-byte character)
SYS 0: Not displayed
1: Displayed
This button enables the entry of "Banner advertising
display 1 (08-9328)" and "Banner advertising display 2
(08-9329)" on the control panel.
SYS Sets the period of time when the job is judged as
completed in local I/F printing (USB or parallel).1: 1.0
sec. 2: 1.5 sec. 50: 25.5 sec. (in increments of 0.5 sec.)
SYS Sets whether the original counter is displayed or not.
0: Not displayed 2: Displayed 4: Displayed (Double
sized original is counted as 2.)
<Default value>
MJD/MJC: 2
Others: 0
SYS Sets the PCL line feed code.
0: Automatic setting
1: CR=CR, LF=LF
2: CR=CR+LF, LF=LF
3: CR=CR, LF=CR+LF
Proce Servic
dure e UI
1 Yes
1 Yes
1
11
11
1
1
1
1