Toshiba e-STUDIO5540C Service Manual page 148

Replace parts
Saddle transport motor
Saddle control PC board
[CB95] Saddle Stitch Finisher stacker motor abnormality
Classification
Finisher related service call
Check item
Stacker carrier
Stacker motor (M14)
Saddle control PC board (SDL)
Replace parts
Stacker motor
Saddle control PC board
[CBA0] Stitch motor (front) abnormality
[CBB0] Stitch motor (rear) abnormality
Classification
Finisher related service call
Check item
Front stitcher/ Rear stitcher
Stitcher home position switch (SW7/
SW5)
Stitcher motor (M7/M6)
Saddle control PC board (SDL)
Replace parts
Stitcher home position switch
Stitcher motor
Saddle control PC board
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
The [CB95] error also occurs when the error [EF16] has
occurred consecutively for 3 times.
• Is there any mechanical problem when the stacker carrier
is moved?
• Motor check
• Connector check
• Harness check
• Connector check (CN4)
• Board check
Stitch motor (front) is not rotating or rotary cam is not moving
normally. [MJ-1103/1104](CBA0)
Stitch motor (rear) is not rotating or rotary cam is not moving
normally. [MJ-1103/1104](CBB0)
• Are the front and rear stitchers and their stands installed
properly?
• Switch check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
• Connector check
• Board check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 147
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
ERROR CODE and TROUBLESHOOTING
8