Toshiba e-STUDIO5540C Service Manual page 657

Sub
05/08 Mode Element
element
08 Setting System Scanning
Mode
08 Setting System User
Mode interface
08 Setting System User
Mode interface
e-STUDIO5540C/6540C/6550C (Ver08)
Sub-
Item Subitem Code
code
9233
9236
9236
Default Acceptable
Details
value value
Equipment name and 0 0-2
user name setting to a
folder when saving
files
Default setting of print 1 1-4
screen
Default setting of print 2 1-2
screen (EFI)
250
RAM Contents
SYS Sets whether or not adding the equipment name and
user name to the folder when saving files.
0: Not add
1: Add the equipment name
2: Add the user name
SYS 1: Private print screen (Job list of log-in user is
displayed if user authentication is enabled.)
2: Hold print screen (Job list of log-in user is displayed if
user authentication is enabled.)
3: Private print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
4: Hold print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
* If user data department management (08-9264) is
changed from OFF to ON, the value in this code
changes from "1" to "2", and "3" to "4". The value does
not change if it is "2" or"4". Reset this value as
necessary when changing user data department
management (08-9264) from OFF to ON.
SYS Sets the default screen when the [PRINT] key is
pressed.
1: Private
2: Hold
Proce Servic
dure e UI
1
1
1