Toshiba e-STUDIO5540C Service Manual page 238

Replace parts
[2E11] Insufficient memory capacity for USB storage
Classification
File sharing related error
Check item
Setting
Replace parts
[2E12] Message reception error in USB storage
[2E13] Message transmission error in USB storage
Classification
File sharing related error
Check item
Setting
Replace parts
[2E14] Invalid parameter for USB storage
Classification
File sharing related error
Check item
Setting
Replace parts
[2E15] Exceeding maximum file capacity
Classification
File sharing related error
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Memory in the USB folder is not sufficient.
If there is a job in progress, perform the job in error again
after the job in progress is finished. If the error still occurs,
turn the power OFF and then back ON, and then perform the
job in error again.
Job status is invalid.
Turn the power OFF and then back ON. Perform the job in
error again.
The specified parameter is invalid.
If a template is being used, recreate the template. If the error
still occurs, turn the power OFF and then back ON. Perform
the job in error again.
There are too many files in the folder.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 237
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
ERROR CODE and TROUBLESHOOTING
8