Toshiba e-STUDIO5540C Service Manual page 1002

Sub
05/08 Mode Element
element
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Paper Automatic change of
Mode feeding paper source
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
4012
4013
4014
4015
When a drawer is 4016
specified
Default Acceptable
Details
value value
Pre-running rotation of 0 0-2
polygonal motor
Polygonal motor 0 0-1
rotational status
switching at the Auto
Clear Mode
Rotational status of 0 0-1
polygonal motor on
standby
Timing of auto- 3 0-21
clearing of polygonal
motor pre-running
rotation
0 PPC 0 <0-1>
66
RAM Contents
SYS Sets whether or not switching the polygonal motor from
the standby rotation to the normal rotation when the
original is set on the RADF or the RADF is opened. 0:
Valid (when using RADF and the original is set
manually) 1: Invalid 2: Valid (when using RADF only)
SYS Sets whether or not switching the polygonal motor from
the normal rotation to the standby rotation at the Auto
Clear Mode.
0: Valid 1: Invalid
SYS Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotational speed is set at 08-4005.)
1: Stopped
SYS Switches the polygonal motor to the standby rotation
when a certain period of time has passed from the pre-
running. This code sets the period to switch the status
to the standby rotation.
15+(setting value) x 5 sec.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec.
5: 40 sec. 6: 45 sec. 7: 50 sec. 8: 55 sec. 9: 60 sec.
10: 65 sec. 11: 70 sec. 12: 75 sec. 13: 80 sec. 14: 85
sec. 15: 90 sec. 16: 95 sec. 17: 100 sec. 18: 105 sec.
19: 110 sec. 20: 115 sec. 21: 120 sec.
* This setting is effective when "0" or "2" is set for 08-
4012.
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
Proce Servic
dure e UI
1
1
1
1
4 Yes