Toshiba e-STUDIO5540C Service Manual page 921

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO5540C:

PS/PDF automatic

stroke adjustment

PS/PDF automatic

stroke adjustment

Graphic line density

adjustment(1200dpi)

e-STUDIO5560C/6560C/6570C (Ver08)

Default setting

Minimum stroke width

when disabled

SYS This code is used to change the width of fine lines in PS

and PDF printing. Automatic stroke adjustment is the

function that prevents the width from changing

according to the position.

This code sets whether automatic stroke adjustment is

enabled or disabled if it is not included in the print data.

If this setting is disabled, there will be an increase in

cases in which the width of fine lines becomes thicker

by 1 dot when they are printed.

2: Forcibly disabled (Ignores command in printing data)

3: Forcibly enabled (Ignores command in printing data)

SYS This code is used to change the width of fine lines in PS

and PDF printing. Automatic stroke adjustment is the

function that prevents the width from changing

according to the position.

This code sets the minimum width of fine lines when the

automatic stroke adjustment is disabled. For example, if

automatic stroke adjustment is disabled and the width

of fine lines is set to "0" in the PS command, the width

of the lines becomes 1 dot if the value of this code is

set to "1"; equally, if it is set to "2", the width of the lines

becomes 2 dots.

SYS The larger the value, the darker the fine lines become.