Toshiba e-STUDIO5540C Service Manual page 104

Check item
Saddle controller board
Replace parts
Paper holding home position sensor
(S38)
Saddle controller board
[EF14] Saddle paper exit jam
Classification
Finisher jam (Saddle section)
Check item
Finisher
Exit sensor (S31)
Saddle controller board
Replace parts
Exit sensor (S31)
Saddle controller board
[EF15] Saddle Stitch Finisher side alignment motor home position detection abnormality
Classification
Finisher jam (Saddle section)
Check item
Finisher
Side alignment home position sensor
(S36)
Side alignment motor (M15)
Saddle controller board
Replace parts
Side alignment home position sensor
(S36)
Side alignment motor (M15)
Saddle controller board
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
• Connector check (CN8)
• Board check
• Is there any paper remaining in the paper transport path of
the equipment or the saddle stitch section of the Finisher?
• Sensor check
• Connector check
• Harness check
• Connector check (CN19)
• Board check
• Is there any mechanical problem when the jog is moved?
• Sensor check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
• Connector check (CN5)
• Board check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 103
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
ERROR CODE and TROUBLESHOOTING
8