Toshiba e-STUDIO5540C Service Manual page 131

Replace parts
RADF read motor
RADF board
[C8A0] RADF reverse motor abnormality
Classification
Optional communication related
service call
Check item
RADF board
RADF reverse motor (MR3)
Replace parts
RADF reverse motor
RADF board
[C8B0] RADF exit motor abnormality
Classification
Optional communication related
service call
Check item
RADF board
RADF exit motor (MR4)
Replace parts
RADF exit motor
RADF board
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
Replace the RADF board, and then perform the automatic
adjustment for the original reading start sensor (05-3210).
An error signal has been detected when the motor is rotating.
• Connector check (CN77)
• Harness check
• Board check
• Motor check
(Perform the output check: 03-286)
• Connector check
• Harness check
Replace the RADF board, and then perform the automatic
adjustment for the original reading start sensor (05-3210).
An error signal has been detected when the motor is rotating.
• Connector check (CN78)
• Harness check
• Board check
• Motor check
(Perform the output check: 03-284)
• Connector check
• Harness check
Replace the RADF board, and then perform the automatic
adjustment for the original reading start sensor (05-3210).
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 130
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks