Toshiba e-STUDIO5540C Service Manual page 914

Sub
05/08 Mode Element
element
05 Adjustmen Image Smudged/f PRT(color)
t mode Processing aint text
adjustment
05 Adjustmen Image Smudged/f PRT(color)
t mode Processing aint text
adjustment
05 Adjustmen Image Smudged/f PRT(color)
t mode Processing aint text
adjustment
05 Adjustmen Image Maximum PRT(color/600 dpi)
t mode Processing toner
density
adjustment
05 Adjustmen Image Maximum PRT(color/1200dpi)
t mode Processing toner
density
adjustment
05 Adjustmen Image Color PRT(color) "Y" for two
t mode Processing balance color printing
adjustment
05 Adjustmen Image Color PRT(color) "Y" for two
t mode Processing balance color printing
adjustment
05 Adjustmen Image Color PRT(color) "Y" for two
t mode Processing balance color printing
adjustment
05 Adjustmen Image Color PRT(color) "M" for two
t mode Processing balance color printing
adjustment
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
8130
8131
8132
8145
8149
XPS/Smooth/600dpi 8150
XPS/Smooth/600dpi 8150
XPS/Smooth/600dpi 8150
XPS/Smooth/600dpi 8151
Default Acceptable
Details
value value
PS 0 0-8
PCL 0 0-8
XPS 0 0-8
OHP film 200 0-255
OHP film 200 0-255
0 Low density 128 0-255
1 Medium density 128 0-255
2 High density 128 0-255
0 Low density 128 0-255
195
RAM Contents
SYS The larger the value, the darker the small text and fine
lines become and the more faint text is suppressed.
SYS The larger the value, the darker the small text and fine
lines become and the more faint text is suppressed.
SYS The larger the value, the darker the small text and fine
lines become and the more faint text is suppressed.
SYS The larger the value, the density of the entire image
increases (the darker the image becomes) and the
permeability of the image decreases. The smaller the
value, the density of the entire image decreases (the
lighter the image becomes) and the permeability of the
image increases.
* Image offset may occur if the value is too large.
SYS The larger the value, the density of the entire image
increases (the darker the image becomes) and the
permeability of the image decreases. The smaller the
value, the density of the entire image decreases (the
lighter the image becomes) and the permeability of the
image increases.
* Image offset may occur if the value is too large.
SYS The larger the value, the darker only the target color
becomes.
SYS The larger the value, the darker only the target color
becomes.
SYS The larger the value, the darker only the target color
becomes.
SYS The larger the value, the darker only the target color
becomes.
Proce Servic
dure e UI
1 Yes
1 Yes
1 Yes
1 Yes
1 Yes
4 Yes
4 Yes
4 Yes
4 Yes