Dc Power Supply Leds On An Acx5000 Router - Juniper ACX5048 Hardware Manual

DC Power Supply LEDs on an ACX5000 Router

Figure 25 on page 72 shows the location of the LEDs on the DC power supply.
Figure 25: DC Power Supply Faceplate on an ACX5000 Router
1 Input LED
—
2 Output LED
—
CAUTION:
The same polarity terminal can be wired together from the same source to provide an
additional current path in a higher power chassis. Do not connect the terminals to
different sources.
Table 19 on page 72 describes the LEDs on the DC power supplies.
Table 19: DC Power Supply LEDs on an ACX5000 Router
Name Color
Input Unlit
Green
Output Unlit
Green
The V+ terminals are shunted internally together, as are the V– terminals.
State
Off
On steadily
Off
On steadily
3 Fault LED
—
Description
The power supply is disconnected from
power, or power is not coming into the power
supply.
Power is coming into the power supply.
The power supply is disconnected from
power, or the power supply is not sending out
power correctly.
The power supply is sending out power
correctly.
72