T4000 Core Router Quick Start
16
Figure 6: Location of Components to Remove from the Rear of the Router
Fan tray
SCGs
Control board 0
Control board 1
SIBs
Power supply 0
Power supply 1
Lifting the Router into the Rack
WARNING:
Do not lift the router using the installation handle or the handles
on the sides of the chassis. Use these handles only to help position the router.
Lifting the chassis and mounting it into a rack requires four people to lift and a fifth person
to secure the mounting screws. The empty chassis weighs over 225 lbs (102 kg).
Make sure the rack is in its permanent location and is secured to the building.
1.
Insert the captive screws of the installation handle into the holes previously occupied
2.
by the captive screws of the power supplies.
Move the router as close as possible to the rack. Use a pallet jack if one is available.
3.
Copyright © 2012, Juniper Networks, Inc.