Clearing Paper Jams In The Advancedpunch Pro - Xerox Versant 80 Press User Manual

Clearing Paper Jams in the AdvancedPunch Pro

Jam Area Jam Clearance Solution
If paper is jammed in the Punch Bypass, perform the following steps:
1. Lift the paper guide plate located.
2. Remove the jammed paper.
3. Close the paper guide plate by raising the handle to unlatch
If paper is jammed in the downward paper chute, perform the follow-
ing steps:
1. Move the lever to the left.
2. Remove the jammed paper.
3. Return the lever to its original location.
If paper is jammed in the left bottom chute, perform the following
steps:
1. Press the top lever while holding the bottom lever; this un-
2. Continue to open the chute until it contacts the magnet
3. Remove the paper.
4. Return the chute to the closed position by returning the
If paper is jammed in the right bottom chute, perform the following
steps:
1. Unlatch the chute.
2. Remove any jammed paper.
3. Return the lever to its original position.
If paper is jammed in the upward paper chute, perform the following
steps:
1. Move the lever to the right.
2. Remove the jammed paper.
3. Return the lever to its original location.
® ®
Xerox Versant 80 Press
User Guide
the mechanism, and then slowly lower it.
latches the chute.
on the left side.
lever to its original position; the latch mechanism is activ-
ated.
GBC AdvancedPunch Pro
22-25