Paper Jams When The Bypass Is Installed On Trays 8 And 9 - Xerox Versant 80 Press User Manual

2. Lift and open the Top Cover of the Bypass (Tray 5).
3. Remove any jammed paper.
Note
If paper is torn, check inside the press and remove it.
4. Close the Top Cover of the Bypass (Tray 5).
5. Reload paper into the tray and resume printing.

Paper Jams When the Bypass is Installed on Trays 8 and 9

Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
® ®
Xerox Versant 80 Press
User Guide
Press Problem Solving
14-43