Problem Solving For The Interface Module / Interface Cooling Module; Fault Codes - Interface Module / Interface Cooling Module - Xerox Versant 80 Press User Manual

Problem Solving for the Interface Module
/ Interface Cooling Module

Fault Codes - Interface Module / Interface Cooling Module

Fault Code Possible Cause
048-100 to 048-107 Paper Jam during feeding
048-300 Module front door is open
048-310, 048-311, 048- Decurler Sensor or Belt issue
312, 048-313, 048-314,
048-315, 048-316
048-317, 048-318, 048- Cooling fan failure
319
048-320 to 048-324 Communication failure or connec-
tion failure
® ®
Xerox Versant 80 Press
User Guide
Interface Module / Interface Cooling Module
Recommended Solution
1. Open the Module front
door.
2. Remove all sheets or
pieces from the jam clear-
ance areas.
3. Close the front door.
4. Verify that the paper be-
ing used is within specifica-
tions.
Ensure door is fully closed.
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
1. Ensure all jams are cleared.
2. Ensure all handles / levers
are returned to closed pos-
ition.
3. Power Off / On the press.
4. If error persists, contact
the Customer Support
Center.
20-5