Loading Tab Stock With The Gbc Advancedpunch; Gbc Advancedpunch Maintenance; Emptying The Punch Container - Xerox Versant 80 Press User Manual

GBC AdvancedPunch

Loading Tab Stock with the GBC AdvancedPunch

When this optional finishing device is attached to your press, tab stock is loaded
differently into paper trays. For detailed information on the GBC AdvancedPunch features
and functions, refer to the GBC AdvancedPunch customer documentation which came
with the device.
The AdvancedPunch punches the leading edge of a sheet. This means that tabs must
be fed with the tab on the trailing edge. The manner in which tabs are loaded into the
tray to cause the correct tab-trailing feeding varies depending upon the tray that is
utilized. The following illustration and related text shows the recommended way to load
tabs depending on which feeder is being used:
1. If using the optional HCF (letter-size / A4) or the OHCF, load the tabs upside down
and change the order one by one (as shown in the illustration).
2. If using the press Trays 1, 2, or 3, load the tabs upside down (as shown in the
illustration).
3. If using an optional finisher with a post-processor inserter (T1), load the tabs upside
down (as shown in the illustration).

GBC AdvancedPunch Maintenance

Emptying the Punch Container

The Punch Container for your AdvancedPunch is located at the front of the unit base.
• The AdvancedPunch uses a sensor to determine when the punch container is full.
• Once the punch container becomes full, the LED light on the front panel of the
AdvancedPunch illuminates, and a message appears on the press User Interface
screen.
• When this message displays, pull out and empty the container of all paper remnants.
21-6
® ®
Xerox Versant 80 Press
User Guide