Punch Dies - Xerox Versant 80 Press User Manual

Item Name
1 Power On
2 Empty Punch Container
3 Fully Insert Punch Contain-
er
4 Fully Insert Punch Die
5 Close Front Door
6 Clear Paper Jam
Note
The LED indicators on the AdvancedPunch will glow dimly if the press is turned on while
the AdvancedPunch power switch is in the Off position. After switching on the
AdvancedPunch, the LED indicators illuminate to their full intensity.

Punch Dies

The GBC AdvancedPunch is capable of punching a variety of hole-punch patterns by
simply changing the punch die. Punch dies can be changed in seconds without tools.
Two punch dies are shown in the following illustrations.
® ®
Xerox Versant 80 Press
User Guide
Description
The green LED illuminates when the power switch on
the AdvancedPunch is set to the on position.
Note
The power cord for the AdvancedPunch must be
plugged into the appropriate power source prior to
setting the power switch to the on position.
When the punch container becomes full of waste paper
remnants,the yellow LED illuminates.
When the punch container is removed or not fully in-
serted into the punch unit, the yellow LED illuminates.
When the punch die is removed or not fully inserted
into the unit, this LED illuminates.
When the front door is open or not completely closed,
the yellow LED illuminates.
When a sheet of paper becomes jammed within the
punch unit,the yellow LED illuminates. Remove the
sheet that is jammed within the AdvancedPunch.
GBC AdvancedPunch
21-3