Replacing The Dry Ink/Toner Waste Bottle - Xerox Versant 80 Press User Manual

7. With one hand on either side of the cartridge, vigorously shake and rotate the new
cartridge up and down and left and right for 30 seconds to redistribute the toner.
8. Install the new dry ink/toner cartridge by gently and evenly sliding the cartridge into
the press until it stops.
9. Close the dry ink/toner cover. If the cover does not close completely, make sure the
cartridge is in the lock position and is installed into the appropriate dry ink/toner
location.

Replacing the Dry Ink/Toner Waste Bottle

The Dry Ink/Toner Waste Bottle collects dry ink/toner that accumulates during the
printing process. When the bottle is full, a message displays on the press UI informing
you to exchange the full bottle with an empty one.
The press contains one waste bottle located at the front of the press behind the Dry
Ink/Toner Waste Bottle Door. When removing a full Dry Ink/Toner Waste bottle, SLOWLY
pull it out of the press. This will prevent any dry ink/toner from spilling out of the bottle.
Note
After you replace the Dry Ink/Toner Waste Bottle, the system automatically resets the
usage counter to zero (0) for this CRU component. Check the Consumables Supply screen
to verify the reset.
1. Ensure that the press is stopped (not running any jobs).
2. Open the front door of the press.
3. Open the Dry Ink/Toner Waste Bottle Door.
4. Grasp the handle of the Dry Ink/Toner Waste bottle and pull it halfway out of the
press.
5. Support the underside of the bottle with your other hand and continue pulling it out
from the press.
Caution
Never use a vacuum cleaner when cleaning up spilled dry ink/toner. Use a broom or
a cloth moistened with a neutral detergent.
6. Use both hands to place the old used Dry Ink/Toner Waste Bottle into the provided
plastic bag.
7. Remove a new, empty waste bottle from the packaging.
8. Hold the center part on the top of a new bottle and insert it evenly and gently into
the press until it comes to a stop.
9. Close the waste bottle door.
10. Close the press front door.
® ®
Xerox Versant 80 Press
User Guide
Press Maintenance
13-9