Staple Jams In The Booklet Maker Cartridge - Xerox Versant 80 Press User Manual

6. Reinstall the cartridge unit to its original position in the finisher.
7. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.

Staple Jams in the Booklet Maker Cartridge

Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. While pressing the lever to the right, pull out the booklet staple cartridge unit.
4. Hold the tabs of the staple cartridge unit by the tabs and lift to remove it.
5. Remove the jammed staples from the cartridge.
Warning
To avoid injury to your fingers, carefully remove the jammed staples from the
cartridge.
® ®
Xerox Versant 80 Press
User Guide
Standard Finisher / Booklet Maker Finisher
24-27