Xerox Versant 80 Press User Manual page 373

Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.
1. Open the Finishing Transport front door.
2. Grasp the green handle 1 and gently pull downwards.
3. Remove the jammed paper.
For a paper jam at the exit of the Finisher Module and the entry of the Finishing
Transport, remove it by pulling the paper towards the Finishing Transport.
4. Return the green handle 1 to its original position.
5. Close the Finishing Transport front door.
6. Ensure that the paper jam indication is cleared from the Finishing Transport status
display.
7. Follow the instructions on the press to restart your print job.
Paper Jams in Area 2
Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.
® ®
Xerox Versant 80 Press
User Guide
Standard Finisher Plus
26-9