Fault Codes - Oversized High Capacity Feeder (Trays 6 And / Or 7) - Xerox Versant 80 Press User Manual

Press Problem Solving
Fault Code Cause
078-260, 078- (Optional) Paper Tray 6 malfunc-
261, 078-262, tioned.
078-263, 078-
264, 078-265,
078-266, 078-
267, 078-268,
078-269, 078-
270, 078-271,
078-272, 078-
273, 078-274,
078-275, 078-
276, 078-277,
078-278, 078-
279, 078-280,
078-300, 078-
301, 078-500,
078-901, 078-
941, 078-942,
078-943

Fault Codes - Oversized High Capacity Feeder (Trays 6 and / or 7)

The OHCF fault codes below may pertain to a specific tray of the feeder. If you experience
these fault codes frequently, you should follow the procedure on how to replace the
feed rolls (Replacing the OHCF Bypass Tray Feed Rolls (Trays 6 and 7)
the OHCF Feed Rolls (Trays 6 and
Fault Area Fault Code
Bypass (Tray 5) 078-105,
078-120,
078-125,
078-126,
078-127
14-20
Remedy
1. Check the paper loaded in Tray 6.
2. Power off and then power on the
machine.
3. If the tray errors are not fixed by
performing the relevant remedy,
contact the Customer Support
Center.
7)).
Possible Cause Recommended Solution
Repetitive misfeeds or 1.
multifeeds
2.
3.
4.
and Replacing
Fan the paper to eliminate
paper adhesion (especially
in high humidity or high
temperature environments).
Clean the Bypass Tray feed,
retard, and nudger rolls with
a damp cloth.
Replace feed rolls (feed, re-
tard, nudger); refer to Repla-
cing the OHCF Bypass Tray
Feed Rolls (Trays 6 and 7).
If problem persists, Call for
service.
® ®
Xerox Versant 80 Press
User Guide