Xerox Versant 80 Press User Manual page 150

Press Maintenance
a) Raise the document feeder.
b) To remove dirt, wipe the document cover with a soft cloth moistened with water
and then wipe it dry with a soft cloth. If dirt is difficult to remove, try gently
wiping with a soft cloth moistened with a small amount of neutral detergent.
2. Cleaning the document (platen) glass
a) To remove dirt, wipe the document glass with a soft cloth moistened with water
and then wipe it dry with a soft cloth. If dirt is difficult to remove, try gently
wiping with a soft cloth moistened with a small amount of neutral detergent.
Caution
Do not press heavily on the document glass to avoid damaging the glass surface.
3. Cleaning the second-side scanning lens assembly
a) The second-side scanning lens assembly is located along the left side of the
document cover. The assembly consists of the mirrored-glass strip, a metal strip,
a white-plastic strip, and rollers. All parts of the assembly must be cleaned to
ensure the best image quality when making copies.
b) With the document feeder open, pull the lever that is located at the top of the
document cover.
13-2
® ®
Xerox Versant 80 Press
User Guide