Feeding Devices - Xerox Versant 80 Press User Manual

Feeding Devices

Bypass (Tray 5)
The Bypass Tray, also called Tray 5, is part of the base system configuration. The
mounting location for the Bypass tray varies when optional feeding devices are added
to the machine configuration:
• If the system configuration includes either the 1-Tray HCF (Letter-size / A4) or the
1-Tray OHCF (Tray 6), then the Bypass (Tray 5) is installed above the feeding device.
• If the system configuration includes one 2-Tray OHCF (Trays 6 and 7), then the
Bypass Tray is installed on top of it.
• If the system configuration includes a second, chained OHCF (Trays 8 and 9), then
the Bypass Tray is installed on top of the second OHCF (Trays 8 and 9).
The Bypass Tray accommodates a weight range of 52 to 300 gsm and media size of
3.86 x 5.75 inches (98 x 146 mm) to 13 x 19.2 inches (330.2 x 488 mm). The Bypass
Tray holds a maximum of 280 sheets of 20 lb. / 75 gsm plain paper. The Bypass Tray
accepts envelopes, postcards and transparencies.
High Capacity Feeder (HCF), 1 Tray
The 1-tray High Capacity Feeder (HCF), also known as Tray 6, provides a 2,000-sheet,
letter-size (8.5 x 11 in. / A4) paper source.
Note
Only letter-size (8.5 x 11 in.) / A4 paper, Long Edge Feed (LEF) can be used in this tray.
1- or 2-Tray Oversized High Capacity Feeder (OHCF / Trays 6 and 7)
The Oversized High Capacity Feeder (OHCF) is available in a 1-tray or 2-tray option.
The OHCF feeds a variety of stock sizes, including standard and oversized stock up to
13 x 19.2 in./330.2 x 488 mm and weighing between 52 gsm and 350 gsm. Each tray
holds 2,000 sheets.
• 1-tray OHCF (with storage cabinet above the tray; shown with Bypass Tray installed)
• 2-tray OHCF (shown with Bypass Tray installed)
® ®
Xerox Versant 80 Press
User Guide
Product Overview
1-9