Xerox Versant 80 Press User Manual page 244

Hide thumbs Also See for Versant 80 Press:

Table of Contents

Chained (Second) Oversized High Capacity Feeder (OHCF / Trays 8 and 9)

5. Next, remove the retard roll assembly at the side of the feeder tray to access the

retard roll. Unscrew the 3 thumbscrews.

6. Slide the retard assembly all the way to the left so it is out of the slots. Pull the

assembly out towards you until completely removed from the tray. Set aside.

7. With the retard assembly out, access and remove the feed roll. To remove, squeeze

both ends of the metal shaft and lift out. To replace, squeeze both ends of the new

roll shaft, and insert and release the roll ends into the notches.

Show Quick Links

Table of Contents