Table of Contents
Advertisement
Example:
- RAS 3 has been set-up as an authorised RAS.
Result:
- User 23 presents (badges) his card on this reader. The Advisor Master system
will treat the card as a valid PIN being entered on RAS 3. All he has to do now is
enter the Advisor Master area(s) he wishes to arm/disarm.
Deny door access if PIN arms
XX, NO - Deny door access if PIN arms
*-Change
If set to Yes, door opening is disabled when the area is armed with PIN.
Reader options
4-Reader Options
XX, Menu
Program settings specific to this reader.
Card format
XX, Aritech ASC
*-Change,Opt:
Set the data format of the reader and card, key or token being used.
•
0: Wiegand 27 bit. For Indala ESP range of proximity readers supplied by
Aritech.
•
1: Spare. Do not use.
•
2: Aritech ASC. For ATS1190 proximity readers.
•
3: Kastle 32 bit. Kastle format cards.
•
4: Wiegand 26 bit (ID = 16, FC = 8). For standard 26 bit Wiegand format
readers, including Wiegand swipe readers supplied by ARITECH. Has a
16 bit card number (0 to 65534) and an 8 bit system code (0 to 255).
•
5: Indala ASC 27 bit. For Indala ASP range of proximity readers using 27 bit
Wiegand format.
•
6: Indala ASC 26 bit. Not used in Europe.
•
7: Wiegand 32 bit. For 32 bit Wiegand format readers. Uses a 16 bit card
number and 16 bit system code.
•
8: Mag.Card Aritech. For Aritech/TECOM format magnetic swipe cards.
•
9: Mag.Card Midas. For Midas format magnetic swipe cards.
•
10: C36 bit. For C36 bit format.
•
11: ATS Wiegand 30 bit. For Aritech Wiegand 30 bit format.
•
12: ATS Wiegand 32 bit. For Aritech Wiegand 32 bit format.
Note:
ATS1170 (1-door RAS) can be used on ATS125x local databus supporting
any ATS125x card formats:
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide
27
Advertisement
Table of Contents
