2-Door / Lift Options; Access Options - Interlogix ATS125 Series Programming Manual

Fourdoor/four-lift dgp
Hide thumbs Also See for ATS125 Series:
Table of Contents

Advertisement

2-Door / Lift options

Accessing the door / lift options
Use this menu for programming data for individual doors and lifts. Each door may
be programmed with specific settings. Before obtaining access to the available
menu options for door and lift programming, select the door to program.
Select Door 17, 18, 19, 20
Door:
Door numbers relevant to ATS125x being programmed are displayed.
Selecting time resolution for minutes or seconds
Time settings may be entered with seconds or minutes resolution. Use [*] or
[MENU*] to select seconds or minutes.

Access options

Within these menus all settings of the access options for the door are configured
XX is the door number being programmed.
Unlock time
XX, Unlock Time 5 Seconds
*-Min, Time:
Program the amount of time for the door to unlock when a user enters a valid
card or PIN at the door reader. The user is then able to open the unlocked door
during the time period of unlock.
See also "Unlock output number" on page 33.
Extended unlock time
XX, Extended Unlock Time 10 Seconds
*-Min, Time
Program the amount of time for the door to unlock when a user, with the
"EXTENDED ACCESS" flag enabled, presents a valid card or PIN at the door
reader. The user is then able to open the unlocked door during the time period of
the extended unlock time.
16
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats1260

Table of Contents