10-To Local Devices - Interlogix ATS125 Series Programming Manual

10-To Local Devices

10 To Local Devices
Menu:
The ATS125x/1260 allows RASes to be connected to the local databus. This
local databus is often used to connect Wiegand readers to the DGP over large
distances. This menu is available to be able to program these devices in a similar
way to programming the ATS1170.The functionality is the same as in installer
programming menu 28, To remote devices in the ATS control panel.
After the menu has been entered, select the device type (RAS or DGP), and then
select the device's address. After this, the selected device may be programmed.
Local Device Type: 1-DGP, 2, RAS
Device Type:
Local RAS Setup
RAS No:
Connecting....
Enter to abort
48 ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide