Table of Contents
Advertisement
Programming map
1-DGP options
Output controllers
Batch Number (range 1 to 40)
Alarm Code Prefix Digits
RASes to be polled
LCD RAS
RASes with RTE enabled
RASes with toggle mode
DGP to be polled
Dual zone
2-Door / Lift options
Access options
Unlock time
Extended unlock time
Shunting
Shunt time
Extended shunt time
Shunt warning time
Shunt until door has closed
Cancel shunt time after door closed
Low security timezone
IN reader requires card and PIN
OUT reader requires card and PIN
IN reader inhibit PIN if timezone
Request To Exit options
Request To Exit Timezone
IN RTE disabled if area is armed
OUT RTE disabled if area is armed
Alarm control
Alarm group
Alarm control
Entry denied if area armed
Reader options
Card format
Zone holds door unlocked
Door unlocked until door open
Unlocked timezone
Unlocked timezone after entry
Report when door closed and locked
Report open/unlocked as unlocked
Hardware options
Unlock output number
Zone number
Monitor second door zone
Forced output number
Shunt zone numbers
Warning output number
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide
Card to PIN time
Two cards time
Multiple Badge time
Re-lock delay time
Region count limit
Map DGP relays
Map panel RAS LED's status
Screensaver
OUT reader inhibit PIN if timezone
IN reader inhibit region 0 user
OUT reader inhibit region 0 user
Anti-passback
IN reader region
OUT reader region
IN reader Two Cards function
OUT reader Two Cards function
Required HSU Number
Prewarning time
OUT reader, no TZ required
Request To Exit control
Request To Exit reporting
Exit denied if area armed
Authorised RAS
Deny door access if PIN arms
Report door open / close
Report forced door
Report DOTL
Reader LED options
Pulsed lock and unlock
Time & Attendance Reader
Disable Duress functionality
DOTL zone number
DOTL output number
Request To Exit zone number
Interlock zone numbers
Areas assigned to door
Alarm output number
69
Advertisement
Table of Contents
