Table of Contents
Advertisement
Security zone number
XX,Security Zone Disabled
*-Dis, Zone:
This menu specifies the zone number on the ATS1260 that will control the "Lift
Security Group". See "Lift Security Group" description below.
"Zones monitor floor selected" on page 37 must be set to NO if the
Note:
Security Group Zone is used.
Lift security group
XX,Lift Security Group Disabled
*-Dis, Grp:
Records a floor group number. Each floor group is programmed with floors and a
Timezone. The Lift Override Group determines floors that maybe freely accessed
in the lift controls, and the times during which they may be accessed provided
that the Security Group Zone (keyswitch) is switched on.
See also option "Security zone number" above.
Total number of floors
XX,Total Floor 0
*-Dis, Floors:
Enter the total number of floors that are available.
Lift bank selection
XX,Lift Bank Disabled
*-Dis, Bank:
Enter the lift bank or the group that the lift is part of. This information must be
obtained from the lift installation company.
Lift car selection
XX,Lift Car Disabled
*-Dis, Car:
Enter the lift car within the bank. This information must be obtained from the lift
installation company.
38
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide
Advertisement
Table of Contents
