Interlogix ATS125 Series Programming Manual page 74

Fourdoor/four-lift dgp
Hide thumbs Also See for ATS125 Series:
Table of Contents

Advertisement

S
screensaver, 15
security group zone number, 38
short list of available zones and outputs per
DGP type, 50
shunt conditions for doors/lifts, 17
DOTL alarm generated, 17
shunt time for doors/lifts, 17
cancel shunt after door closed, 18
extending shunt time, 17
until door closed, 18
warning shunt time, 17
shunting zone numbers, 34
siren tamper
specifying output number, 44
system code, 10
system options
low battery output number, 44
mains fail output number, 44
tamper output number, 44
T
tamper output number, 44
time & attendance reader, 32
timer settings in minutes or seconds, 16
timers
card to PIN, 13
extended shunt, 17
extended unlock, 16
multiple badge, 14
re-lock delay, 14
shunt, 17
shunt warning, 17
two cards, 14
unlock, 16
timezone
specifying when automatic unlock takes
effect, 28
timezone number
for opening doors, 18
programming, 28
toggle mode
programming RAS, 12
two cards
programming time, 14
U
unlock time for doors/lifts, 16
extended access time, 16
V
view card details, 41
W
warning shunt time for doors/lifts, 17
Wiegand interface, 20, 21
68
Z
zones
single or dual zone, 13
zones numbers available, 50
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats1260

Table of Contents