Table of Contents
Advertisement
Entry denied if area armed
XX, NO - Entry Denied If Area Armed
*-Change
Stop a user opening a door using the IN reader when any of the areas assigned
to the door are armed. Separate programming records are provided for each
door with an IN reader.
•
Yes: A valid card or PIN will not open a door if any of the areas assigned to
the door are armed.
•
No: A valid card or PIN will open a door regardless of the area armed status.
Note:
If ATS125x loses communication with the Advisor Master, then ATS125x
remembers the latest status of the area.
See also "Areas assigned to door" on page 35.
Exit denied if area armed
XX, NO - Exit Denied If Area Armed
*-Change
Stop a user opening a door using the OUT reader when any of the areas
assigned to the door are armed. Separate programming records are provided for
each door with an OUT reader.
•
Yes: A valid card or PIN will not open a door if any of the areas assigned to
the door are armed.
•
No: A valid card or PIN will open a door regardless of the area armed status.
Note:
If ATS125x loses communication with the Advisor Master, then ATS125x
remembers the latest status of the area.
See also "Areas assigned to door" on page 35.
Authorised RAS
XX, RAS Number Disabled
RAS:
When a user badges a valid card at a RAS on the ATS system databus (not the
ATS125x local databus) it activates alarm control. This simulates a user entering
a PIN at the RAS so he may select what area he wants to arm and disarm.
Note:
If a RAS number is entered, then this door reader no longer functions as a
door opening reader. Only one number can be entered here.
The RAS on the Advisor Master that is selected for arm control must also have
the option "Code ENTER Toggles Area Status" set to YES. This is programmed
in the Advisor Master Installer menu 3, RAS Database.
This facility, for multiple area arm control, presumes the use of the ATS RAS
used in conjunction with a reader.
26
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide
Advertisement
Table of Contents
