Mounting An Ex2300 Switch - Juniper EX2300 Series Hardware Manual

Set the switch's management options by following the appropriate instructions:
Connect a Device to a Network for Out-of-Band Management
•
Connect a Device to a Management Console Using an RJ-45 Connector
•
SEE ALSO
Rack Requirements | 63
Cabinet Requirements | 65
Clearance Requirements for Airflow and Hardware Maintenance for EX2300 Switches | 67

Mounting an EX2300 Switch

Table 36 on page 105 lists the methods you can use to mount an EX2300 switch.
Table 36: EX2300 Switch Mounting Methods
Mounting Method
Desk or other level
surface (using the rubber
feet preinstalled on the
chassis)
Desk or other level
surface (using screws)
Wall
A surface made of
ferrous material
Switch Model
•
EX2300-C
•
EX2300
EX2300-C
EX2300-C
EX2300 except the
EX2300-24MP and
EX2300-48MP models
EX2300-C
More Information
On a desk or other level surface by using the rubber feet
preinstalled on the chassis
On or under a desk or other level surface by using screws
On a wall by using screws
On a wall by using the separately orderable wall-mount kit
On or under a surface made of ferrous material by using
the separately orderable magnet-mount kit
105