Juniper EX2300 Series Hardware Manual page 121

c. Mark a point P at a distance of 4.3 in. (10.9 cm) on a level line to the right from hole B.
d. Drill a hole C at a distance of 3.78 in. (9.6 cm) on a level line from point P and install a mounting
screw.
4. For mounting the switch under a desk or other level surface, hold the switch such that the holes on
the bottom panel of the switch align with the screw heads, lift the switch, and then slide the switch
forward or backward until it locks in place. See
Figure 54: Mounting the EX2300-C Switch Under a Desk or Other Level Surface by Using Screws
5. (Optional) Attach the standard cable lock to the security slot on the switch:
a. Fasten the cable to a desk or a rack and set the lock to unlocked position using the key.
Figure 54 on page 112.
112