Compliance Statements For Acoustic Noise For Ex Series Switches - Juniper EX2300 Series Hardware Manual

NOTE: For the EX6200-48P line cards, the intrabuilding ports must use shielded intrabuilding
cabling or wiring that is grounded at both ends.
• All EX8200 switches
• EX9251
• EX9253
These switches meet the following NEBS compliance standards:
• SR-3580 NEBS Criteria Levels (Level 4 Compliance)
• GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment
• GR-63-CORE: NEBS, Physical Protection
• The equipment is suitable for installation as part of the Common Bonding Network (CBN).
• The equipment is suitable for installation in locations where the National Electrical Code (NEC)
applies.
• The battery return connection is to be treated as an Isolated DC return (DC-I), as defined in
GR-1089-CORE.
• You must provision a readily accessible device outside of the equipment to disconnect power. The
device must also be rated based on local electrical code practice.
Compliance Statements for Acoustic Noise for EX
Series Switches
This topic applies to hardware devices in the EX Series product family, which includes EX Series
switches, the EX Series Redundant Power System (RPS), and the XRE200 External Routing Engine.
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70 dB(A)
oder weniger gemäss EN ISO 7779
Translation: The emitted sound pressure is below 70 dB(A) per EN ISO 7779.
305