Juniper EX2300 Series Hardware Manual page 20

3 Protective earthing terminal
—
Figure 8: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports without PoE Capability
CLEI code label
1
—
Serial number ID label
2
—
The rear panel of the EX2300 switch except the EX2300-C, EX2300-24MP, and EX2300-48MP switch
models consists of the following components:
• One management Ethernet port that supports an RJ-45 connector
• One console port that supports an RJ-45 connector
• One protective earthing terminal
• One ESD point
• Air exhaust openings
• Serial number ID label
• CLEI code label
• One AC power cord inlet or DC power terminals
• One USB port
Figure 9 on page 12 shows the rear panel of an AC-powered EX2300 switch with 24 Gigabit Ethernet
ports with PoE capability except the EX2300-24MP model and
panel of an EX2300 switch with 48 Gigabit Ethernet ports with PoE capability except the EX2300-48MP
model. Figure 11 on page 13
Ethernet ports without PoE capability and
switch with 48 Gigabit Ethernet ports without PoE capability.
panel of a DC-powered EX2300 switch with 24 Gigabit Ethernet ports.
shows the rear panel of an AC-powered EX2300 switch with 24 Gigabit
Figure 12 on page 13
Protective earthing terminal
3
—
AC power cord inlet
4
—
Figure 10 on page 12
shows the rear panel of an EX2300
Figure 13 on page 14
shows the rear
shows the rear
11