Juniper EX2300 Series Hardware Manual page 48

1 LED on RJ-45 ports
—
Figure 30: LED on the Uplink Ports in EX2300-24MP Switches
LED on the uplink ports
1
—
Figure 31: LED on the Uplink Ports in EX2300-48MP Switches
1 LED on the uplink ports
—
Table 13 on page 39 describes the Link/Activity LED on the RJ-45 network ports and uplink ports in
EX2300-24MP and EX2300-48MP models.
Table 13: Link/Activity LED on the RJ-45 Network Ports and Uplink Ports in EX2300-24MP and
EX2300-48MP Models
LED Color
Link/Activity Green
You can tell:
• The speed and duplex mode at which a port is operating in by issuing the command
media.
State and Description
•
On steadily—The port and the link are active, but there is no link
activity.
•
Blinking—The port and the link are active, and there is link
activity.
•
Off—The port is not active.
show interfaces
39