Locating The Serial Number On An Ex2300 Switch Or Component; Listing The Switch And Components Details With The Cli - Juniper EX2300 Series Hardware Manual

Locating the Serial Number on an EX2300 Switch or Component

IN THIS SECTION

Listing the Switch and Components Details with the CLI | 255

Locating the Chassis Serial Number ID Label on an EX2300 Switch | 257
If you are returning an EX2300 switch or hardware component to Juniper Networks for repair or
replacement, you must locate the serial number of the switch or component. You must provide the serial
number to the Juniper Networks Technical Assistance Center (JTAC) when you contact them to obtain a
Return Material Authorization (RMA) number.
If the switch is operational and you can access the CLI, you can list serial numbers for the switch and for
some components with a CLI command. If you do not have access to the CLI or if the serial number does
not appear in the command output, you can locate the serial number ID label on the physical switch (see
Figure 97 on page 257) or component.
NOTE: If you want to find the serial number on the physical switch component, you need to
remove the component from the switch chassis, for which you must have the required parts and
tools available.
Listing the Switch and Components Details with the CLI
To list the switch and switch components and their serial numbers, enter the following CLI command:
user@switch> show
chassis hardware
The following are sample output of this command on EX2300-C and EX2300 switches:
Hardware inventory:
Item Version Part number Serial number
Chassis
Pseudo CB 0
Routing Engine 0
FPC 0 REV 04
HV0215410003
BUILTIN BUILTIN
650-059984 HV0215410003
Description
EX2300-C-12P
RE-EX2300C-12P
EX2300-C-12P
255