Check Active Alarms With The J-Web Interface - Juniper EX2300 Series Hardware Manual

Check Active Alarms with the J-Web Interface

IN THIS SECTION
Purpose | 235
Action | 235
Meaning | 235
Purpose
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view alarm information for the EX Series switches including alarm
type, alarm severity, and a brief description for each active alarm on the switching platform.
Action
To view the active alarms:
1. Select Monitor > Events and Alarms > View Alarms in the J-Web interface.
2. Select an alarm filter based on alarm type, severity, description, and date range.
3. Click Go.
All the alarms matching the filter are displayed.
NOTE: When the switch is reset, the active alarms are displayed.
Meaning
Table 58 on page 236 lists the alarm output fields.
235