Locking or Unlocking Settings
You can lock or unlock the setpoint, system, or fan setting to prevent changes.
To lock or unlock a setting:
1. Verify that the sensor is in operating mode and at the home screen.
2. Choose a setting to lock or unlock:
3. Press the left and right arrows for 4 seconds.
BAS-SVX40K-EN
The arrow to the
temperature indicates
that it is the setpoint.
•
Select the setpoint by pressing the up or down arrow.
•
Select the system menu by pressing the center button. Use the left or right arrow to choose the
setting.
•
From the system menu press the down arrow to select the fan menu. Use the left or right arrow
to choose the setting.
Fan menu
left of the
WCS-SB/SD Configuration
57